Septos para viales de muestreadores automáticos

Thermo Scientific™ Septum para viales de muestreadores automáticos de 13 mm, 13-425 mm, silicona azul/PTFE

Septos de 13 mm para uso con tapones de rosca o tapones a presión/para encapsular, disponibles en PTFE/caucho rojo, PTFE/silicona o PTFE rojo/silicona blanca/PTFE rojo. X1000 SEPTUM NATIONAL SCIENTIFIC IVORY PTFE/WHITEsilicone for 4mL screw thread vials 13mm (pack of

Thermo Scientific™ Septum para viales de muestreadores automáticos de 8 mm, silicona blanca/PTFE rojo, 1.3 mm

Los septos para tapones de rosca 8-425 están fabricados con PTFE, PTFE/goma o PTFE/silicona para adaptarse a una gran variedad de aplicaciones. X500 8MM PTFE/SILICONE/PTFE SEALS (PACK OF 500)

Thermo Scientific™ Discos de PTFE/silicona, 22 mm de diámetro

Combine la inertidad del recubrimiento de PTFE con la capacidad de resellado de la silicona mediante los discos de PTFE/silicona Thermo Scientific™. X72 TUF-BOND TEFLON DISCS 72 FOR 100ML

DWK Life Sciences Septum para tapones con parte superior abierta

Se puede utilizar con tapones de rosca X100 20 MM SEPTA TEFLON/SILICONE

Thermo Scientific™ Discos laminados de PTFE/caucho

Para un sellado altamente inerte y no reactivo, utilice discos laminados de PTFE/caucho Thermo Scientific™.

X72 Disc fits 0.3mL and 1mL small reaction vials

Fisherbrand™ Septum for 24-400 Screw Thread Cap

Laminated on one side with PTFE for high chemical resistance and an inert barrier between sample and carrier material. X1000 SEPTUM 22MM SILICONA/PTFE

National Target DP™ Septa

Thermo Scientific™ National Target DP Septa are precision cut to form a uniform, evaporation-resistant seal. X100 Target dp septa, pre-slit teflon/rrC4000-57

Fisherbrand™ Septum for 8-425 screw thread cap

Most septa are laminated on one side with PTFE for high chemical resistance and an inert barrier between sample and carrier material. X1000 8mm Septa, PTFE red/Silicone white/PTFE red, 45° shore A, 1.0mm

Fisherbrand™ Septum for Magnetic Universal Precision Thread Cap

Most septa are laminated on one side with PTFE for high chemical resistance and an inert barrier between sample and carrier material. X1000 17mm Septa, Silicone transparent blue/PTFE white, 45° shore A, 1.3mm

Thermo Scientific™ Tuf-Bond™ PTFE/Silicone Discs

Discs that combine the inertness of PTFE with the resealability of silicone X72 Disc Thermo Scientific Tuf-Bond PTFE/silicone

Wheaton™ PTFE/Butadiene Septa

X100 13MM SEPTA TEFLON/CAOUTCHOUC

Fisherbrand™ Septum for 18mm PP Screw Cap

Most septa are laminated on one side with PTFE for high chemical resistance and an inert barrier between sample and carrier material. X1000 SEPTUM 16MM SILICONA/PTFE

Fisherbrand™ 43.2mm Septum for SCHOTT Screw Caps

Most septa are laminated on one side with PTFE for high chemical resistance and an inert barrier between sample and carrier material. X500 43.2mm Septa, Butyl red/PTFE grey, 55° shoreA, 2.5mm

Fisherbrand™ Septum for 9mm Short Thread Cap

Most septa are laminated on one side with PTFE for high chemical resistance and an inert barrier between sample and carrier material. X1000 9mm Septa, Silicone white/PTFE red, 55° shore A, 1.0mm

Fisherbrand™ Septum for 10-425 screw thread cap

Most septa are laminated on one side with PTFE for high chemical resistance and an inert barrier between sample and carrier material. X1000 9.5mm Septa, Silicone white/PTFE blue, 55° shore A, 1.5mm, slitted

Fisherbrand™ Septum for 13-425 screw cap

Most septa are laminated on one side with PTFE for high chemical resistance and an inert barrier between sample and carrier material. X1000 12mm Septa, Silicone white/PTFE blue, 55° shore A, 1.5mm, cross-slitted

Fisherbrand™ Septum for 24-400 Screw Thread Cap

Most septa are laminated on one side with PTFE for high chemical resistance and an inert barrier between sample and carrier material. X1000 Septum 22mm, Silicone white/PTFE blue, 55° s

Thermo Scientific™ High Temperature GC Septa

X25 SEPTUM GC12MM HTE TEMPERATURE

Fisherbrand™ Septum for 13mm Crimp Cap

Laminated on one side with PTFE for high chemical resistance and an inert barrier between sample and carrier material. X1000 13mm Septa, Natural Rubber red-orange/TEF transparent, 60° shore A, 1.3mm

Thermo Scientific™ Septos para viales de muestreadores automáticos de 10 mm

Los septos Thermo Scientific™ National Target de 10 mm están diseñados para utilizarlos con tapones de rosca 10-425. X100 SEPTUM NATIONAL SCIENTIFIC PRE-SLIT BLUEPTFE/white silicone for 10-425 Target screw thread

Fisherbrand™ Septum for 11mm Crimp Cap

Most septa are laminated on one side with PTFE for high chemical resistance and an inert barrier between sample and carrier material. X1000 11mm Septa, PTFE red/Silicone white/PTFE red, 45° shore A, 1.0mm

Fisherbrand™ Septum for 20mm Crimp Cap

Most septa are laminated on one side with PTFE for high chemical resistance and an inert barrier between sample and carrier material. X1000 SEPT MOULE 20MM BUTYL 3MM

Thermo Scientific™ Chromacol Septum 12mm SILICONE/PTFE 1.43mm THICK

Most septa are laminated on one side with PTFE for high chemical resistance and an inert barrier between sample and carrier material. X500 12MM SILI/PTFE 1.43 MM THICK

Fisherbrand™ Septum for 22mm PE, Cap

Most septa are laminated on one side with PTFE for high chemical resistance and an inert barrier between sample and carrier material. X1000 19mm Septa, Butyl red/PTFE grey, 55° shore A, 1.3mm

Fisherbrand™ 30.3mm Septum for SCHOTT Screw Caps

Most septa are laminated on one side with PTFE for high chemical resistance and an inert barrier between sample and carrier material. X1000 30.3mm Septa, Silicone cream/PTFE beige, 55° shore A, 3.2mm, for SCHOTT Screw Cap GL 32

Thermo Scientific™ Septos para viales de muestreadores automáticos de 9 mm

Los septos de 9 mm están disponibles en PTFE/caucho rojo, PTFE/silicona o PTFE rojo/silicona blanca para adaptarlos a una amplia variedad de aplicaciones. X100 SEPTA NATIONAL SCIENTIFIC TARGET DP(R) REDPTFE/white silicone /red PTFE for Target DP(R)

Fisherbrand™ 16.8mm Septum for SCHOTT Screw Caps

Most septa are laminated on one side with PTFE for high chemical resistance and an inert barrier between sample and carrier material. X1000 16.8mm Septa, Silicone cream/PTFE beige, 55° shore A, 3.2mm, for SCHOTT Screw Cap GL18

Thermo Scientific™ Chromseal GC Injection Septa

The CHROMSEAL GC septa is designed for long lifetime and low injection port adhesion. X25 GC INJECTION SEPTA,CHROMSEAL 9004 RED 11MM

Fisherbrand™ 11mm PTFE Septa

Septa made of virginal PTFE. Fisherbrand™ 11mm PTFE Septa are white septa for use with ND11 Crimp Closures and ND11 Crimp Neck Vials for uncritical HPLC and GC analysis. X1000 11.1mm Septa, PTFE virginal, 53° shore D, 0.25mm

Fisherbrand™ Septum for Magnetic Universal Precision Thread Cap

Most septa are laminated on one side with PTFE for high chemical resistance and an inert barrier between sample and carrier material. X1000 17mm Septa, Butyl red/PTFE grey, 55° shore A, 1.6mm

  spinner